Skip to main content
Texan Landscape Group logo
The completed Abington Way project in Houston — a 16×32 cantilevered aluminum pergola with a sandalwood insulated roof panel ceiling over a full-length outdoor kitchen, with pearl white pavers set into turf in a diamond pattern
12 / Aluminum

Louvered and Aluminum Pergolas for Houston Backyards

Aluminum gives a pergola thin sections, long spans, and a finish that survives Houston humidity without upkeep. Louvered models add the part timber cannot do: you set the roof to the weather instead of accepting whatever the slats give you.

Why Texan Landscape Group for Aluminum Pergolas

  • 01

    The number on this page is the number we work to.

    Texan Landscape Group publishes an investment range of $14,000 to $55,000, or roughly $85 to $175 per square foot of covered area for this service before you call, rather than qualifying you on the phone first. Almost no Houston landscape contractor does.

  • 02

    Gutters are built into the beams.

    A louvered roof drains away from the seating rather than off the front edge onto the people underneath it.

  • 03

    20+ years, 1,200+ completed Houston projects, and 396+ reviews across platforms.

    Chris Gosselin, our founder, holds a Construction Management degree from the University of Arkansas, and he and his brother Tony were both born and raised in Spring Branch.

  • 04

    One call afterwards.

    No claims portal, no ticket number, and no subcontractor who has moved on.

01 — Scope

What a Louvered Aluminum Pergola Involves

Every project has the same core scope, adapted to the specific property and program.

  • 01

    Frame & Span

    Post and beam sizes selected for the span and the wind load, so the structure stays slim without extra posts in the way.

  • 02

    Roof Options

    Fixed slat, adjustable louvered, or solid roof chosen for how much sun and rain the space should take.

  • 03

    Powder-Coat Finish

    Factory powder-coated in a colour chosen against the house, with no site painting and no annual maintenance.

  • 04

    Footings & Anchoring

    Anchored to new footings or an existing slab on concealed base plates rated for the load.

  • 05

    Integrated Lighting

    Low-voltage lighting, fans, and heaters run inside the frame so no cable is left visible.

  • 06

    Screens & Drainage

    Side screens where privacy or sun calls for them, and gutters built into the beams so a louvered roof drains away from the seating.

02 — Process

Our Aluminum Pergola Installation Process in Houston

  1. 01

    Site Walk and Span Measurement

    We measure the area to be covered and check the attachment point on the house. Aluminum’s advantage is span, so the first question is how far the structure has to reach without a post in the way.

  2. 02

    Frame, Span and Roof Selection

    Post and beam sizes are selected for the span and the wind load so the structure stays slim without extra posts. Fixed slat, adjustable louvered, or solid roof is chosen for how much sun and rain the space should take.

  3. 03

    Powder-Coat Finish Selection

    The frame is factory powder-coated in a colour chosen against the house. Nothing is painted on site, which is why there is no annual maintenance and no brush marks.

  4. 04

    Footings, Anchoring and Integrated Services

    The structure is anchored to new footings or an existing slab on concealed base plates rated for the load. Low-voltage lighting, fans, and heaters are run inside the frame so no cable is left visible.

  5. 05

    Screens, Drainage and Handover

    Side screens go in where privacy or low sun calls for them, and gutters built into the beams take the water away from the seating. We commission the louvers, hand over the controls, and register the manufacturer warranty in your name.

The completed Lamonte Lane project in Houston — a 15×27 black aluminum pergola with a polycarbonate roof over a paver deck, outdoor kitchen and dining table, with the existing pool alongside it
03 — Craft

Everything you see.
Everything you don’t.

What separates aluminum pergola installation that lasts from work that fails in two summers is the part you never look at again once it is finished. On this job that is frame & span and roof options — decided before anything visible goes in, and impossible to correct afterwards without taking up what sits on top. Houston humidity is what makes aluminum worth the premium here: a factory powder-coat does not grey, cup, or need sanding the way timber does in this climate. What you do see gets held to the same standard: the joint lines, the edges, and how the finished work meets the house.

04 — Investment

How Much Does a Louvered Pergola Cost in Houston?

The range below is what work of this kind typically runs in Houston, so you can place yourself in it before you call. It is a starting point, not a quote — every project is scoped to the specific property, program, and material selections.

We confirm a clear investment range in the initial consultation and issue a detailed proposal after the design phase.

What moves the number
  • Footprint, span, and the number of posts the design carries
  • Roof type — fixed slat, adjustable louvered, or solid
  • Motorisation, rain sensing, and the controls specified
  • New footings, or anchoring to a slab already there
  • Integrated lighting, fans, heaters, and privacy screens
Typical investment

$14,000 – $55,000

Most projects of this type

$85 – $175per sq ft of covered area
At the lower end
A fixed-slat powder-coated frame over an existing slab, anchored on concealed base plates.
At the upper end
A large motorised louvered roof with rain sensing and integrated gutters, plus side screens, lighting, and heaters run inside the frame.

A range, not a quote. Your figure depends on square footage, materials, how much grading and drainage the site needs, and equipment access.

05 — The Work

Aluminum Pergolas we have built.

Frames from completed projects across Houston. Every photograph is our own work — follow any of them through to the project it came from.

06 — Service Area

Aluminum Pergola Installation Across Houston and the Surrounding Area

Texan Landscape Group installs aluminum pergolas across River Oaks, Tanglewood, Memorial, Braeswood Place, Southgate, West University Place, Bellaire, Meyerland, Spring Valley Village, Hilshire Village and Garden Oaks, and throughout Harris and Fort Bend counties. Houston humidity is what makes aluminum worth the premium here: a factory powder-coat does not grey, cup, or need sanding the way timber does in this climate. That is a design decision on every project, not a note added at the end of one.

Powder-coat performance in coastal and humid climates is classified under AAMA architectural finish standards, which is the specification we order frames against rather than accepting whatever finish a supplier offers. Design and construction sit inside one in-house team, which is why the drawing and the finished work match. You can learn more about our crew, or see all of our Houston landscape services for the full scope we design and build.

07 — Reviews

What Houston Homeowners Say About Our Aluminum Pergola Installation

“They turfed and landscaped my entire backyard at my brand new home and built a modern pergola that matches the house perfectly. It looks incredible, and they finished everything in less than a week.”
Chase StockGoogle Review
4.9260 reviews on GoogleRead more on Google
  • “Texan Landscape Group did a great job on my recent landscaping project. The owner came out personally to provide the quote and take measurements. He was very professional, knowledgeable, and easy to communicate with thro…”
    Hieu Vo7 months ago
  • “Couldn’t be more proud of the work Texan Landscape group for a fine work they did with my field and the turf installation around the fiend. I recommend them to anyone interested in having their landscape done with turf.…”
    thiago Reis7 months ago
  • “I had an amazing experience with this company. They turfed and landscaped my entire backyard at my brand new home and built a modern pergola that matches the house perfectly — it looks incredible. They finished everythi…”
    Chase Stock7 months ago
08 — FAQs

Aluminum Pergola Installation FAQs

How much does an aluminum or louvered pergola cost?

Most run $14,000 to $55,000, or roughly $85 to $175 per square foot of covered area. Adjustable louvered systems sit well above fixed slat, and motorisation, integrated lighting, and side screens each move the figure.

Is a louvered roof worth it over a fixed pergola?

If the space is meant to be usable in changing weather, yes. A fixed pergola gives you whatever shade the slats give you at that hour. Louvers let you open the roof for a spring evening and close it against an afternoon storm, which is most of the year in Houston.

Does aluminum get too hot to sit under?

The frame does warm in direct sun, but the covered area beneath a closed louvered roof sits materially cooler than open sky, and no heat is radiated down the way an uninsulated metal patio cover radiates it. For maximum temperature drop, an insulated roof panel is the better answer.

Does an aluminum pergola need any maintenance?

Washing, and that is close to it. There is no sanding, no staining, and no repainting, which is the reason most Houston clients choose it over cedar. Louvered mechanisms should be operated regularly and inspected as part of a normal service check.

How long does an aluminum pergola take to install?

Typically two to four weeks on site once the frame is manufactured, plus lead time on the powder-coated components. Permitting time is additional where the attachment requires it.

Start Your Project

Ready to explore
what’s possible?

A quick conversation will tell us both if there is a fit — no obligation, no hard sell.

4.9 average from 396+ Houston reviews