Skip to main content
Texan Landscape Group logo
White pergola over a flagstone terrace and a trestle dining table at the Mill Creek project, with the covered patio and pine woods behind it
03 / Flagstone

Flagstone Patio Installation Built for Houston Clay

Flagstone suits yards where a straight-edged patio would look imposed: courtyards, side gardens, and the ground under mature trees. Every piece is fitted individually, so the jointing and the shuffling are most of the craft.

Why Texan Landscape Group for Flagstone Patios

  • 01

    The number on this page is the number we work to.

    Texan Landscape Group publishes an investment range of $9,000 to $35,000, or roughly $25 to $45 per square foot installed for this service before you call, rather than qualifying you on the phone first. Almost no Houston landscape contractor does.

  • 02

    Every piece is dry-laid and shuffled before it is set.

    The joint width stays consistent across the whole field rather than tightening where the crew ran out of patience.

  • 03

    Design and build sit inside the same five-person team.

    The person who walks your property draws it, and the crew that installs it answers to Chris and Tony Gosselin. There is no sales handoff and no subcontracted install to chase.

  • 04

    One call afterwards.

    No claims portal, no ticket number, and no subcontractor who has moved on.

01 — Scope

What Flagstone Patio Installation Involves

Every project has the same core scope, adapted to the specific property and program.

  • 01

    Stone Selection

    Colour, thickness, and size range chosen against the house and the existing paving before anything is delivered.

  • 02

    Base & Setting Bed

    Excavation and a compacted base with a screeded setting bed, or a mortar bed where the terrace carries furniture and daily traffic.

  • 03

    Fitting & Cutting

    Each piece dry-laid, shuffled, and cut so the joints stay tight and consistent across the whole field.

  • 04

    Jointing

    Joints filled with sand, decomposed granite, or mortar, or planted with a low ground cover, depending on how the terrace should read.

  • 05

    Grade & Drainage

    Falls set away from the house and across the terrace so water leaves rather than standing in the joints.

  • 06

    Steps & Borders

    Flagstone treads, boulder steps, and stone borders tying the terrace into lawn, beds, and walkways.

02 — Process

Our Flagstone Patio Installation Process in Houston

  1. 01

    Site Walk and Stone Selection

    We walk the courtyard or garden with you and pull flagstone samples against the house in daylight. Colour, thickness, and the size range are agreed before delivery, because the size mix is what decides how the finished field reads.

  2. 02

    Base and Setting Bed

    We excavate and build a compacted base with a screeded setting bed, or a mortar bed where the terrace carries furniture and daily traffic. Under mature trees we hand-excavate and keep the profile shallow to protect the root plate.

  3. 03

    Fitting and Cutting

    Each piece is dry-laid, shuffled, and cut so the joints stay tight and consistent across the whole field. This is where most of the labour sits, and it is what separates a fitted terrace from a crazy-paved one.

  4. 04

    Jointing and Falls

    Joints are filled with sand, decomposed granite, or mortar, or planted with a low ground cover, depending on how the terrace should read. Falls are set away from the house so water leaves rather than standing in the joints.

  5. 05

    Steps, Borders and Handover

    Flagstone treads, boulder steps, and stone borders tie the terrace into lawn, beds, and walkways. We wash it down, walk it with you, and explain what maintaining the jointing involves.

The completed Merlin Street project in Spring Valley from above — a freeform pool with a flagstone deck set into a new lawn among mature trees
03 — Craft

Everything you see.
Everything you don’t.

What separates flagstone patio installation that lasts from work that fails in two summers is the part you never look at again once it is finished. On this job that is stone selection and base & setting bed — decided before anything visible goes in, and impossible to correct afterwards without taking up what sits on top. Flagstone is the surface that works under Houston’s mature live oaks, where excavating for a full paver base would cut the root plate. What you do see gets held to the same standard: the joint lines, the edges, and how the finished work meets the house.

04 — Investment

How Much Does a Flagstone Patio Cost in Houston?

The range below is what work of this kind typically runs in Houston, so you can place yourself in it before you call. It is a starting point, not a quote — every project is scoped to the specific property, program, and material selections.

We confirm a clear investment range in the initial consultation and issue a detailed proposal after the design phase.

What moves the number
  • Square footage, and whether the stone is dry-laid or set in mortar
  • Stone selection — thickness, colour, and the size range chosen
  • How much cutting and shuffling the fitting takes to keep joints tight
  • Jointing — sand, decomposed granite, mortar, or planted ground cover
  • Steps, boulders, and borders across changes in level
Typical investment

$9,000 – $35,000

Most projects of this type

$25 – $45per sq ft installed
At the lower end
A courtyard or garden terrace dry-laid on a compacted base, with sand or decomposed granite joints.
At the upper end
A large mortared terrace over a slab with cut borders, boulder steps, and planted joints, every piece fitted individually.

A range, not a quote. Your figure depends on square footage, materials, how much grading and drainage the site needs, and equipment access.

05 — The Work

Flagstone Patios we have built.

Frames from completed projects across Houston. Every photograph is our own work — follow any of them through to the project it came from.

06 — Service Area

Flagstone Patio Installation Across Houston and the Surrounding Area

Texan Landscape Group installs flagstone patios across the Houston Heights, Garden Oaks, Oak Forest, Rice Military, Montrose, the Museum District, Braeswood Place, Bellaire, West University Place, Memorial and Spring Branch, and throughout Harris County. Flagstone is the surface that works under Houston’s mature live oaks, where excavating for a full paver base would cut the root plate. That is a design decision on every project, not a note added at the end of one.

Working under mature trees means respecting the critical root zone; the Texas A&M Forest Service publishes the root-protection guidance we build to when a terrace goes in beneath an established oak. Design and construction sit inside one in-house team, which is why the drawing and the finished work match. You can learn more about our crew, or see all of our Houston landscape services for the full scope we design and build.

07 — Reviews

What Houston Homeowners Say About Our Flagstone Patio Installation

4.9260 reviews on GoogleRead more on Google
  • “Texan Landscape Group did a great job on my recent landscaping project. The owner came out personally to provide the quote and take measurements. He was very professional, knowledgeable, and easy to communicate with thro…”
    Hieu Vo7 months ago
  • “Couldn’t be more proud of the work Texan Landscape group for a fine work they did with my field and the turf installation around the fiend. I recommend them to anyone interested in having their landscape done with turf.…”
    thiago Reis7 months ago
  • “I had an amazing experience with this company. They turfed and landscaped my entire backyard at my brand new home and built a modern pergola that matches the house perfectly — it looks incredible. They finished everythi…”
    Chase Stock7 months ago
08 — FAQs

Flagstone Patio Installation FAQs

Why do flagstone patio quotes vary so much?

Most flagstone terraces run $9,000 to $35,000, or roughly $25 to $45 per square foot installed. Mortar-set costs more than dry-laid, thicker stone costs more than thin, and the amount of cutting a tight-jointed layout needs is the single biggest labour variable.

Dry-laid or mortared flagstone?

Dry-laid on a compacted base drains through, tolerates ground movement, and can be lifted and reset. Mortar-set on a slab is flatter, holds furniture better, and does not grow weeds in the joints, but it needs a stable slab beneath it and it cracks if the slab moves. Courtyards and garden paths usually want dry-laid; a dining terrace off the house usually wants mortared.

Will flagstone work under my oak tree?

Usually, and better than most alternatives. A dry-laid flagstone terrace can be built on a shallow profile with hand excavation, so the root plate is not cut the way a full paver base would cut it. We assess the tree first and keep the build inside the critical root zone guidance.

Do flagstone joints grow weeds?

Sand and decomposed granite joints will, unless they are polymeric or planted deliberately with a low ground cover. Mortared joints do not. It is a maintenance trade-off against drainage and flexibility, and it is worth deciding at design rather than discovering in year two.

How long does a flagstone patio take to install?

Typically one to three weeks depending on square footage and how much cutting the layout needs. Flagstone is slower than pavers because every piece is individually fitted. You get a schedule with the proposal.

Start Your Project

Ready to explore
what’s possible?

A quick conversation will tell us both if there is a fit — no obligation, no hard sell.

4.9 average from 396+ Houston reviews